For gamers who love animation, it is certainly normal to use Figures to decorate their computers, but is it good to decorate models and do they affect the operation of the game? machine? Do they have any effect on internal components? Let's find out with WebTech360 in this article.
![Is It Really Safe To Put Toy Figure Model In A PC Case? Is It Really Safe To Put Toy Figure Model In A PC Case?](https://img.webtech360.com/resources8/images93/image-2678-0813130449831.jpg)
Is it possible to get model toys on PC Case?
The answer is yes, you can put any toy in your PC case as long as the toy doesn't have any iron or steel components and is 100% non-melting plastic. In fact in an ATX case you have a lot of free space if you have a M-ATX motherboard in an ATX case . Because of that emptiness, the writer himself really wants to leave any toy models in that space.
![Is It Really Safe To Put Toy Figure Model In A PC Case? Is It Really Safe To Put Toy Figure Model In A PC Case?](https://img.webtech360.com/resources8/images93/image-1923-0813130450992.jpg)
But for one thing, we need to consider a few more important factors to be able to safely place the toy model in the PC. Specifically, WebTech360 said here is the temperature problem of the PC Case . The fact that placing a small model does not affect your airflow in any way, but if the number is large and tight, it is a completely different story.
![Is It Really Safe To Put Toy Figure Model In A PC Case? Is It Really Safe To Put Toy Figure Model In A PC Case?](https://img.webtech360.com/resources8/images93/image-8961-0813130451652.jpg)
Therefore WebTech360 often recommends that you do not leave any items to slow down your computer, similar to dust, they will make your computer slow and performance will decrease when your computer is too crowded. but still trying to keep the toy models sealed. However, being passionate, loving beauty is hard for you to stop, so WebTech360 will guide you on how to place toys safely.
How to place the Model to be safe for the PC Case
Air circulation in a PC case should always be as prioritized as possible to help your PC's performance reach the maximum as described by the manufacturer. The nature of the PC case is a fairly enclosed space, so if you block all the air flow, surely the components will be affected and the temperature and there is a possibility that they will burn and you will lose a lot of money to fix. repair or replace.
![Is It Really Safe To Put Toy Figure Model In A PC Case? Is It Really Safe To Put Toy Figure Model In A PC Case?](https://img.webtech360.com/resources8/images93/image-3823-0813130452531.jpg)
Therefore, before placing any model, you should check carefully to see if your machine has good ventilation, whether your toy model is blocking the airflow, if it is, please Look for a model that's smaller or has the most openings so your machine has at least airflow.
In general, as long as your device does not overheat and is still ok, you can still leave the figure comfortably. And if the temperature when playing games is over 80>90 degrees or higher, it is recommended that you give up or change yourself to a more airy, wider case. If you install custom heatsink configurations, it won't be too much of a problem because your device's temperature is extremely ok.
![Is It Really Safe To Put Toy Figure Model In A PC Case? Is It Really Safe To Put Toy Figure Model In A PC Case?](https://img.webtech360.com/resources8/images93/image-5485-0813130455450.jpg)
Is it possible to put the model above the video card ? The answer is yes but the problem will be that your graphics card has a backplate . Currently, graphics cards are almost equipped with backplates, especially high-end graphics cards, but in general graphics cards, especially for ordinary computer users, it is unlikely that your graphics card will be equipped with a backplate. . Putting the model on the graphics card like that not only poses the risk of burning the card because the card's pcb is very hot, the backplate will be what protects the circuit of the video card as well as helps your model not to be undulating due to the screws. graphics card screw.
As mentioned above, placing the model with iron and steel or any other conductive material is extremely dangerous, it will not only damage your machine but also cause a fire or explosion. So the best way we will put the model completely in 100% plastic and should use insulating tape to fix them if necessary. Stick the adhesive tapes on to avoid vibrations that can damage your model or affect other components.
In addition, placing teddy bears is something to consider carefully, because teddy bears will often create a lot of loose hairs that can be sucked in by the fan blades of your machine, causing damage to components, this is what Extremely dangerous if not fixed soon. Therefore it is best to order seamless patterns that do not have any trimming hairs out.
It is also possible to place flower pots as long as the flowers are heat-tolerant flowers that do not need watering and more. However, the writer personally does not have a clear understanding of this issue, perhaps we will need a few people to verify, but note that the products used by the user in the process of damage caused by the user themselves will No warranty and repair. So please always remember to be responsible for your bookings.
summary
Hopefully with the sharing of WebTech360 , you will feel a little more secure in ordering toy models, figures of your favorite idols. But WebTech360 again, do not put them in the machine will still be the best option. You should also clean the machine regularly to avoid dust as well as help your machine be less dusty. Anyway, everything has to be sacrificed, a little beauty is not killing anyone, so you should be ok.