You own a juicer , but it is often stopped working, stuck, the juicer does not come out of water ... causing many difficulties for you. Here are some common errors on the juicer and some solutions to overcome. Let's find out with WebTech360!
>> Which fruit juicer is good to buy?
>> Experience choosing to buy fruit juicer
Machine does not work when plugged in
A special feature about the juicer is the safety lock system. If we install it incorrectly or fail to lock it, the machine will not function. Always remember to check and follow the instructions, make sure you have installed the right equipment and enough to prevent the above situation.
Make sure the actions are correct
The press is not working at its original capacity
The efficiency and speed of the press suddenly decreased much more than in the early days. There are many reasons for this situation, but the core thing may still be that in the process of using you have not really used it properly and do not preserve it carefully.
For the machine to use more efficiently, you should use according to the instructions. For hard fruits, you should cut them into pieces or peel them before pressing. Besides, each time you press, you should give an amount just enough to maintain the quietness of the machine. In addition, regular cleaning is also essential for the press to operate more efficiently.
Don't add too much food at a time
The machine stops working suddenly
The machine is operating normally but suddenly does not work, most likely because the machine has been working continuously for too long, causing the motor to overheat and cut off the power automatically.
To limit this error, you should disconnect once every 30 minutes of operation to allow the machine to rest for about 15 minutes and turn on the engine again. This not only helps to preserve the machine better but also minimizes other errors.
In addition to the above cause, the blade stuck is also a factor that causes your machine to suddenly stop working. Please remedy the above situation by chopping up the pressed material before you proceed to put it in the machine.
Should be cut into small pieces before pressing
The machine presses out water slowly or not
Adding too many ingredients at the same time will easily lead to the above phenomenon because the sieve system and the residue will not be able to control the amount of too much food that you put in. In addition, you may have used food that is difficult to filter off the pulp that has turned off the filter. The best solution for you during such times is to turn off the computer, check the filters and clean it.
The juicer is one of the most common mistakes in the juicer
The press is rusted
In addition to the above errors, during long-term use, the press sometimes rusted the outer shell, especially the blade. This will be very dangerous for consumers because rust in juice will contain impurities harmful to health.
The cause of this situation may be that right from the time you buy the product, you do not pay close attention to the material of the machine or during use you do not know how to properly preserve the device to rust. You can overcome this problem by always cleaning the machine, keeping it in a dry place, and always checking the materials and origins of the products as well as always choosing to buy reliable branded machines.
>> Find out about different types of juicer on the market today
Choose a reputable brand
General precautions when using the juicer
- Do not squeeze too soft or too hard fruits. Depending on the characteristics of each machine to choose the right fruit.
- After each use, clean the sieve, blades, and pulp tray to ensure the durability of the machine.
- To reduce the jammed juicer you should cut the fruit into small pieces before putting it into the machine, this will also make it easier for the fruit to drain.
- Install the machine in accordance with the manual of the supplier when buying the device for use.
- Limit continuous use for a long time. If you need to squeeze a lot of fruit, let the machine rest between grinds. Resting the machine is contributing to ensure the operation of the machine is smoother and to prevent the engine from overheating.
>> Juicer costs 500 - 1 million VND
>> Juicer costs from 1.5 million - 2 million
The sharing from the above article has provided you with information about common errors on the juicer and solutions for each case. You can apply these methods when encountering common errors to be able to use the machine more efficiently. In addition, to ensure that the device can operate for a long time, you should clean it regularly and take good care of it.
>> The secret to using and preserving the juicer properly
>> Compare the regular juicer and the slow juicer